ADDR 0x76/0x77
I2C address select: 1-2 SDO low 0x76 (default), 2-3 SDO high 0x77
That description comes from one board. A passive of this value does a different job on each design — see the per-board component tables below for what it does in each context.
| Value | ADDR 0x76/0x77 |
|---|---|
| Footprint | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm |
| KiCad symbol | Jumper:SolderJumper_3_Bridged12 |
| Datasheet | Not applicable — generic passive or connector |