RE=PMOD4
Open default: bridge (and cut JP1) to control ~RE from PMOD pin 4
| Value | RE=PMOD4 |
|---|---|
| Footprint | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm |
| KiCad symbol | Jumper:SolderJumper_2_Open |
| Datasheet | Not applicable — generic passive or connector |
Where it is used
| Board | Name | References |
|---|---|---|
| AXA-011 | RS-485 node PMOD module | JP2 |